HVAC Company In bloomingdale IL

Performing maintenance on an American standard system and flushing out floor drain

Performed a diagnostic check on a Bryant AC unit after the homeowner reported a noise during a storm the previous night. Inspected the exterior unit and found debris lodged in the fan blades. Removed the debris and checked for damage to the fan and motor. Verified that all electrical connections were secure and undamaged. Tested the system, listening for unusual noises, and monitored its operation. Ensured the AC unit was functioning properly and efficiently without any further issues.

Tuning up the AC. Making sure everything is running and testing well. Cleaning outdoor unit and making recommendations on how to improve comfort and air quality.

Repairing some bad wiring on a air conditioner

Today I performed annual preventative maintenance on a Rheem air conditioning system. First, I cleaned the outdoor condenser coil using a NU-Calgon CalClean coil cleaner and rinsed thoroughly. All electrical connections were tightened, and the contactor was checked for pitting. I took amp draw readings on the compressor and condenser fan motors using a Fieldpiece SC660 clamp meter - all within specifications. The indoor evaporator coil was brushed and vacuumed clean. Lastly, the refrigerant charge was verified by measuring superheat and subcooling values against the Lennox charging charts. The system is now operating at peak efficiency for the cooling season.

Performing the annual maintenance on the air conditioner. Testing operation and efficiency. Also foam cleaning the outdoor unit. Making recommendations on how to improve comfort.

Cleaning and testing the AC unit. Checking efficiency and operation of the system with a no breakdown guarantee.

Replacing a bad condenser motor on a high efficiency Lennox air conditioner

Courtesy visit to test operation from a cold weather install. Checked pressures and air quality to ensure everything is running perfect.

Doing the annual AC maintenance. Testing the system fully including a foam cleaning.

Performing the annual AC maintenance and testing. Foam cleaning outdoor unit and checking efficiency.

Tuning up the AC unit. Fully testing the operation and efficiency of the system including a foam cleaning.

Cleaning and testing the 2 AC units. Checking for any improvements in efficiency or air quality in the home and making recommendations.

In Bloomingdale, IL, I performed a thorough cleaning and testing of the AC system. This routine maintenance included evaluating the system's efficiency to ensure it operates at peak performance. Additionally, I conducted tests on the air quality within the home to detect any contaminants or imbalances. These measures are essential for maintaining a healthy indoor environment and ensuring the AC system is effectively cooling and filtering the air.

In Bloomingdale, IL, I conducted a detailed cleaning and testing of the AC system, focusing on its efficiency and air quality. Provided recommendations for enhancements to optimize cooling performance and improve the indoor air environment, ensuring the unit operates at peak efficiency.

Testing efficiency and operationof AC system. Foam cleaning outdoor unit and giving a no breakdown guarantee.

AC tune ups on 2 air conditioning units. Checking air filters and cleaning outdoor units on new installation

Testing and foam cleaning outdoor unit. Replacing a failed part on the air conditioner.

Doing a foam cleaning of a Lennox air conditioning. Also testing efficiency and reliability of the system with a no breakdown guarantee.

Performing scheduled maintenance on a Lennox air conditioner as recommended by manufacturer. Testing air quality and making recommendations on how to improve it.

Preforming an air conditioning tune up. Testing equipment for efficiency and reliability.

Removed band installed new 40 gal Bradford white water heater

Doing a furnace optimization by replacing the thermostat to enhance control and efficiency. This comprehensive tune-up involves close inspection, cleaning, and adjustment of critical components, ensuring peak performance and energy efficiency for your heating system.

Furnace tune up and filter replacement

Furnace repair.